A402 - Building Elevation
A402 - Building Elevation
Drawing Scale
Imperial = 1/4" = 1'-0" (1:48)Metric = 1:50
The building elevation is always the same scale and is the view that is tagged and annotated. When a building elevation at this scale does not fit on the view it will need to be broken up into sections and A401 - Key Building Elevation introduced to callout the individual sections.
Drawing Sample:
PDF document 4MB
Drawing Checklist:
- Grid Extents
- Level Extents
- Datum Dimensions on Grids and Levels
- Site / Building Legend for Sites w Multiple Buildings
- View Title
- Grade Line / Masking
- Matchlines
- Unit type number in text, DM_Text_Title, above each unit.
- Elevation Notes (Plan Notes)
- Notes key, filter by sheet.
- Callouts to Unit Elevations, if applicable.
- Window Tags
- Door Tags, for exterior doors only.
- Egress Window / Door Notation in text, DM_Text, at each egress window or door.
- Dimension to grade.
- Dimension of width of operable unit.
- Dimension of height of operable unit.
Elevation Notes
The Notes key is generated using Revit's Note Block and the DM_Annotation_Drawing_Note which is loaded in the Base Template:
Elevation notes are in the 400 series for sorting so this would be accomplished by using a three digit number starting with 4, 4##.
Egress Window / Door Notation
Sample Notes:
- Egress Door to Patio as per 9.9.10.1 NBC AE 2023
- Egress Window as per 9.9.10.1 NBC AE 2023
